FREN
Procédés Hallier Procédés Hallier Procédés Hallier Procédés Hallier
Accessories
 


Modular inverter 450VA
- According to EMC and safety EN60669-2-1 ; 230V AC ± 10%, 40 to 60Hz
- Incandescent lamps 450W ; Halogen lamps for 230V, 450W
- Ferromagnetic transformer : 450VA ; Toroidal transformer : 450VA
- Minimum load : 40W/50VA ; 2x1.5mm² or 1x2.5mm²
- Ambient t° : 35 °C ; 1 DIN module H89mmx117.5mmxP60mm ; ± 94g
- Complete device : 05-704 ; Protection against overload with automatic reset ; Protection against short-circuit with subtitute fuse ...

- Filter for interference sent through a group of equipments
- 04-226-20 Accessories : Fuse F3, 15AH inverter 310-018xx, 026xx-310 and 05-704
- 09-794-31 : Fuse for inverter 05-704


Universal modular inverter
Drive for the variation of the incandescent of the lamp, halogen lamps 230V and all types of low voltage halogen lamps. Automatic selection of variation. Control while pushing a button N.O. without voltage, 0-10V, current control at 1/10V or directly controlled on the device. Max. 30, push buttons N.O. in parallel circuit. Used with or without memory. Additional memory to save the light level parameters by direct push button. Staircase function integrated ...

Setting of the minimum level between 1 and 40% and the max. between 60 and 100%. Led visualization mode and indication in case of defect.

- Conforms to European directives for EMC and safety EN60669-2-1
- 230 V AC ± 10%, 50Hz ± 1Hz
- Incandescent lamps: 1400W
- Ferromagnetic transformer: 1400VA
- Halogen lamps for 230V: 1400W
- Toroidal transformer: 1400VA
- Electronic transformer: 1400VA
- Minimum load : 100W/100VA
- Soundless
- Protection in case of short-circuit
- 2 x 2.5 mm² or 1 x 4 mm²
- Ambient temperature: 35 ° C
- ± 144 g
- 6 modules DIN 90 mm x H 1,105 mm x D 60 mm
- Complete device: 65-410
- Filter for interference sent through a group of equipments
- In case of overload, protection with an automatic reset